Send Inquiry

Request To Call Back

Electromagnetic Flow Meter

Get a Price/Quote

Electromagnetic Flow Meter Specification

Connectivity Type
4-20 mA Output, RS485 Modbus

Resolution
0.01 m3/h

Sensor Type
Non-intrusive, Full Bore

Pressure Range
Up to 16 Bar

Equipment Type
Electromagnetic Flow Meter

Flow Rate
0.5 m3/h to 1000 m3/h

Frequency
50/60 Hz

Protection
IP65 / IP68

Application Media
Conductive Liquids, Slurries

Humidity %
Up to 95% (Non-condensing)

Capacity
Suitable for small to large pipelines

Temperature Range
-10C to +80C

Measurement Range
0.5 m/s to 10 m/s

Diameter
15 mm to 600 mm

Current Range
0-20 mA / 4-20 mA

Material
Flow Tube Stainless Steel, Electrode SS316L / Hastelloy / Titanium, Lining PTFE / Rubber

Power Supply
230 V AC / 24 V DC

Power Consumption
Less than 15VA

Accuracy
0.5% of reading

Display Type
LCD Digital Display

Range
0.5 m3/h to 1000 m3/h

Mounting
Flange Type

Signal Converter
Integral / Remote type

Display Units
m3/h, L/min, L/s, etc.

Max Velocity
up to 10 m/s

Enclosure Material
Powder coated Aluminum / SS304

Data Logging
Optional

Installation Orientation
Horizontal / Vertical

Ingress Protection
Weatherproof / Submersible (option)

Communication Protocols
MODBUS, HART, Profibus (optional)

Calibration
Factory calibrated, traceable to national standards

Electrode Type
Fixed, Flush

Output Signal
Pulse, Analog, Digital

Power Failure Indication
Yes

Process Connection
ANSI / DIN / JIS Standard Flanges

Display Features
Backlit, Totalizer, Instantaneous Flow

Cable Entry
PG9 / PG13.5 / M20

Min Conductivity
20 S/cm

About Electromagnetic Flow Meter

Advantages Electromagnetic Flow Meters

Can quickly respond to changes in flow.
Provides a linear wide range.
You can optimize the measurement range settings.
The meter can measure backflow.
No additional pressure loss is required.
Built for the flow with no obstacles.
Primarily suitable for hydraulic solids transportation.
Changes in temperature, density, viscosity, concentration, and conductivity affect meter operation.

Specifications

Standard outputs for electromagnetic flow meters include analog, frequency, RS 232/RS 485, or GSM connectivity. We offer local and remote display models with weather and pressure-resistant housings as optional features.

Application Media Water, Any conductive Liquid
Flange Sizes-150# ANSI: 15mm to 300 mm (0.5 to 12)
Display- Digital
Conductivity-10 uS
Maximum Pressure-10 kg/cm 2Minimum
Output4-20mAdc or Modbus RTU
Flow Range0.3 to 10 m/s
Power Supply 230 VACS
Frequency0 to 1000 Hz

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number